The 30 years after the movie thriller 'The Spy Who Loved Me' hit the silver screen Rinspeed sQuba is the first car that can actually 'fly' under water.
Zumikon - "Dive it again, James!" If the situation gets too hot for the secret agent he'll go underground - or under water. So demonstrated impressively by Roger Moore in 'The Spy Who Loved Me" in 1977 when he dove below the waves in a sleek vehicle that moments before seemed to be an ordinary car. The only problem: The scene never really took place; it was an animation.
With the Rinspeed sQuba, the world's first real submersible car. The acknowledged James Bond enthusiast and Swiss automobile visionary kept revisiting this scene in his mind over and over.
This submerged stabile flight at a depth of 10 meters that sets the Rinspeed sQuba apart from military vehicles. While the latter can go under water, they are limited to driving slowly over the submerged ground. Rinderknecht: "It is undoubtedly not an easy task to make a car watertight and pressure resistant enough to be maneuverable under water. The real challenge however was to create a submersible car that moves like a fish in water."
It also had to be a sports car that was converted into a diving dream in the facilities of Swiss engineering specialist Esoro. In a first step the combustion engine was removed and replaced by several electric motors. Three motors are located in the rear. One provides propulsion on land, the other two drive the screws for underwater motoring. They are supported by two powerful Seabob jet drives in the front, which 'breathe' through special rotating louvers from HS Genion (for opening and closing the water intake). The rotating outlet jets were designed to be extremely light yet twist resistant by using high-tech nano materials, so-called Carbon Nano Tubes.
It is a sure bet that the Rinspeed sQuba will steal the show from any 'Baywatch' beauty on the beach. And easily, too: You drive the car into the water and the car floats. That is, until you crack the door to let the water in. Immediately the Rinspeed sQuba starts on his way to the underwater world. The occupants' breathing air comes from an integrated tank of compressed air that divers know from scuba diving. Rinderknecht: "For safety reasons we have built the vehicle as an open car so that the occupants can get out quickly in an emergency. With an enclosed cabin opening the door might be impossible." But safety wasn't the only reason for choosing an open-top design: With an enclosed volume of just two cubic meters of air the vehicle weight would have to increase by two tons (!) to counteract the unwanted buoyancy, giving the Rinspeed sQuba the land mobility of a turtle. Without occupants the Rinspeed sQuba surfaces automatically.
It is even capable of autonomous driving on land thanks to a sophisticated laser sensor system from the Hamburg company Ibeo - without any help from the driver or passenger.
Power is supplied by rechargeable Lithium-Ion batteries. Rinderknecht: "The 'sQuba' is a zero-emission car as documented by the rotating license plate in the rear. It produces no exhaust emissions. The Swiss are among the world's pioneers in the area of hydropower. The 'sQuba's' filling station is the water reservoir." It is no surprise that the vehicle features powerful yet energy-saving LED lighting technology.
3-D foil elements with embossed fish and sharkskin patterns from Wetzel Processing Group and Hornschuch add visual pizzazz and streamline the exterior. Together with styling elements from Foliatec they create a harmonious velvety matt-white appearance.
For shore leave the Rinspeed sQuba relies on a stainless coil-over suspension from KW automotive and large Pirelli tires mounted on custom-made forged light-weight wheels from AEZ with 17- and 18-inch diameters. But the Rinspeed sQuba is really at home in the water. To make the occupants feel at home there as well the innovative salt-water resistant interior from Strähle + Hess features genuine mother-of-pearl trim and diamond-plated non-slip inlays from KGS Diamond, normally used in high-tech abrasives. After all, 'diamonds are a girl's best friends.' The high-tech VDO instrument cluster and controls create a futuristic ambiance and allow controlling all vehicle functions even while submerged.
Zumikon - "Dive it again, James!" If the situation gets too hot for the secret agent he'll go underground - or under water. So demonstrated impressively by Roger Moore in 'The Spy Who Loved Me" in 1977 when he dove below the waves in a sleek vehicle that moments before seemed to be an ordinary car. The only problem: The scene never really took place; it was an animation.
With the Rinspeed sQuba, the world's first real submersible car. The acknowledged James Bond enthusiast and Swiss automobile visionary kept revisiting this scene in his mind over and over.
This submerged stabile flight at a depth of 10 meters that sets the Rinspeed sQuba apart from military vehicles. While the latter can go under water, they are limited to driving slowly over the submerged ground. Rinderknecht: "It is undoubtedly not an easy task to make a car watertight and pressure resistant enough to be maneuverable under water. The real challenge however was to create a submersible car that moves like a fish in water."
It also had to be a sports car that was converted into a diving dream in the facilities of Swiss engineering specialist Esoro. In a first step the combustion engine was removed and replaced by several electric motors. Three motors are located in the rear. One provides propulsion on land, the other two drive the screws for underwater motoring. They are supported by two powerful Seabob jet drives in the front, which 'breathe' through special rotating louvers from HS Genion (for opening and closing the water intake). The rotating outlet jets were designed to be extremely light yet twist resistant by using high-tech nano materials, so-called Carbon Nano Tubes.
It is a sure bet that the Rinspeed sQuba will steal the show from any 'Baywatch' beauty on the beach. And easily, too: You drive the car into the water and the car floats. That is, until you crack the door to let the water in. Immediately the Rinspeed sQuba starts on his way to the underwater world. The occupants' breathing air comes from an integrated tank of compressed air that divers know from scuba diving. Rinderknecht: "For safety reasons we have built the vehicle as an open car so that the occupants can get out quickly in an emergency. With an enclosed cabin opening the door might be impossible." But safety wasn't the only reason for choosing an open-top design: With an enclosed volume of just two cubic meters of air the vehicle weight would have to increase by two tons (!) to counteract the unwanted buoyancy, giving the Rinspeed sQuba the land mobility of a turtle. Without occupants the Rinspeed sQuba surfaces automatically.
It is even capable of autonomous driving on land thanks to a sophisticated laser sensor system from the Hamburg company Ibeo - without any help from the driver or passenger.
Power is supplied by rechargeable Lithium-Ion batteries. Rinderknecht: "The 'sQuba' is a zero-emission car as documented by the rotating license plate in the rear. It produces no exhaust emissions. The Swiss are among the world's pioneers in the area of hydropower. The 'sQuba's' filling station is the water reservoir." It is no surprise that the vehicle features powerful yet energy-saving LED lighting technology.
3-D foil elements with embossed fish and sharkskin patterns from Wetzel Processing Group and Hornschuch add visual pizzazz and streamline the exterior. Together with styling elements from Foliatec they create a harmonious velvety matt-white appearance.
For shore leave the Rinspeed sQuba relies on a stainless coil-over suspension from KW automotive and large Pirelli tires mounted on custom-made forged light-weight wheels from AEZ with 17- and 18-inch diameters. But the Rinspeed sQuba is really at home in the water. To make the occupants feel at home there as well the innovative salt-water resistant interior from Strähle + Hess features genuine mother-of-pearl trim and diamond-plated non-slip inlays from KGS Diamond, normally used in high-tech abrasives. After all, 'diamonds are a girl's best friends.' The high-tech VDO instrument cluster and controls create a futuristic ambiance and allow controlling all vehicle functions even while submerged.
0 comments:
Post a Comment