GMC Sierra All Terrain HD Concept, 2011

 

 

 

 

 

 

GMC Sierra All Terrain HD Concept, 2011

The GMC Sierra All Terrain HD concept is an exploration of heavy-duty truck capability combined with greater off-road versatility. It is highlighted by a bold exterior design, enhanced all-terrain suspension and premium details expected of a GMC - all designed to enable greater access to off-road destinations.

The new 2011 Sierra HD underpins the All Terrain HD concept, with a modified, production-based 4WD chassis and the Duramax diesel/Allison 1000 six-speed powertrain. The enhanced suspension and unique body dimensions, including increased ground clearance and wider track, as well as greater approach/departure angles, deliver off-road capability while maintaining HD levels of payload and trailering capacity.

The GMC Sierra All Terrain HD features a unique five-foot, eight-inch Crew Cab/short box body configuration that supports a wheels-at-the-corners proportion. Shorter in overall length than production Sierra HD models, the concept's dimensions contribute to greater approach/departure angles.

Additional off-road elements:

•     Wider, 73-inch (1,853 mm) track for greater stability
•     Approximately 3 inches (76 mm) greater ground clearance
•     Custom front upper and lower control arms
•     Specially constructed Fox off-road shocks with remote fluid reservoirs (integrated in the wheel house liners)
•     Front and rear jounce shocks
•     Electronic front stabilizer bar disconnection
•     35-inch-tall BFGoodrich KM2 "mud terrain" tires mounted on 20-inch machined aluminum wheels
•     Full composite underbody protection.

Purposeful design
From every angle, the All Terrain HD looks the part of a dedicated off-road performer, with bold, accentuated features complemented by a wide stance and tall profile.

Streamlined bumpers are designed to enhance approach/departure angles and incorporate frame-mounted recovery hooks - with integrated skid plates. A large, airflow-optimized grille maximizes cooling in tough conditions, while a forced-induction hood delivers more air to the Duramax diesel engine.

Large fender flares stretch away from the body to cover the 35-inch-tall BFGoodrich tires. At the rear, the cargo box features lockable, lighted storage compartments, along with a number of tie-down cleats, including a pair in the bed floor and two on each side of the bed. A non-slip rubber pad is used on the tailgate, while two special compartments inside the cargo box provide access to a 110-volt power outlet and air compressor. A composite bed liner with a unique "circuit board" pattern provides a protective cover for the bed.

Motorized, deployable assist steps for the cab and cargo bed make it easier to enter and exit the All Terrain HD, while maximizing ground clearance during off-road driving. It also incorporates a number of industrial-grade lighting elements to provide greater visibility for safer driving where stars may be the only other source of illumination.

The lighting details:

•     High-intensity LED headlamp, taillamp and fog lamp lighting mounted in impact-resistant composite housings and featuring edge-lit illumination
•     High-intensity LED park and turn signal lamps
•     Smooth-appearance front marker lamps integrated behind the top edge of the windshield glass
•     Integrated center high-mounted stop lamp and rear marker lights mounted at the top edge of the rear window glass
•     LED floodlights for the cargo bed and assist steps.

The All Terrain HD is painted Iridium Metallic - a dark charcoal color that reveals a reddish, anodized inflection when viewed from certain angles. It complements other anodized and satin-metal finishes on the exterior, which give the truck a more precise and functional appearance.

The interior matches the exterior aesthetic, with premium appointments and increased functionality, including enhanced lighting. It conveys solidity and precision, blending accent details such as stainless steel mesh and satin chrome with an amplified expression of the All Terrain's premium features. Two-tone dark gray leather seats, matched with embossed carbon fiber-style leather on the seating surfaces, have red contrast stitching. Additional leather-wrapped interior features include the steering wheel, instrument panel and center console.

A new navigation radio is also featured on the GMC Sierra All Terrain HD concept and previews future radios to be offered in GMC vehicles. An integrated 80-gig hard drive contains map data for the navigation system. It eliminates the need for a map disc and provides greater storage of music from portable devices. It also features DVR-style "time lapse playback," which allows up to 20 minutes of recording/playback from the AM/FM/XM radio stations.

The all Terrain chassis and suspension
Based on the chassis of the 2011 Sierra HD trucks, the All Terrain HD features a fully boxed steel frame with exceptional strength and torsional stiffness. It incorporates the production models' new independent front suspension and asymmetrical rear leaf-spring suspensions, but with a wider 73-inch (1,853 mm) track (front and rear) that enhances stability during off-road and highway driving. A production Sierra 2500HD has front and rear tracks of 68.8 inches (1,748 mm) and 67.3 inches (1,709 mm), respectively.

An increased ride height provides greater ground clearance of 21.1 inches (536 mm) at the rockers and 11.8 inches (300 mm) at the skid plates, while specialized Fox off-road shocks deliver exceptional damping on tough terrain. They were created specially for the All Terrain HD, with specific valving. The shocks feature visible, remote fluid reservoirs - connected to the shock bodies via custom hoses - mounted in the wheel house liners and are matched with front and rear jounce shocks. They add additional compression damping and more controlled rebound, which helps increase control, stability and handling.

The All Terrain HD also features electronic disconnection of the front stabilizer bar, which enables greater crawling capability on rocky terrain. The driver simply pushes a button inside the cab to disconnect it from the front suspension.

Custom upper and lower control arms for the front suspension are designed to work with the Fox off-road shocks and jounce shocks, while supporting the greater ground clearance and ride height. They contribute to the wider track, as do the aggressive 20-inch machined aluminum all-terrain wheels. The wheels are deep, with six split-spoke elements, and are constructed in a reverse drop-flange method that ensures optimal strength. They also feature a mix of satin chrome and anodized aluminum finishes, which provide durability and a premium appearance that complements the body's Iridium Metallic color.

A full composite underbody protection system shields the All Terrain HD's transmission, drivetrain, fuel tank, exhaust system and axle differentials. It starts with the front bumper, which rolls beneath the truck and leads to a composite, integral belly pan that covers a front suspension skid plate. Protective covers are also mounted beneath the driveline components, while the front and rear differentials feature direct-mounted skid plates. The rear bumper is integrated with the rear skid plate.

Powertrain details
The GMC Sierra All Terrain HD concept is propelled by the new, production 6.6L Duramax turbo-diesel V-8 and Allison 1000 six-speed automatic transmission powertrain combination offered in the 2011 Sierra HD trucks. The Duramax is rated at 397 horsepower (296 kW) and 765 lb.-ft. of torque (1,037 Nm).

The powerful 6.6L Duramax is more fuel-efficient - with up to 11-percent greater fuel economy than previous versions - and reduces NOx emissions by up to 63 percent. The powertrain's efficiency is assisted by the Allison 1000 transmission, which requires less engine power to funnel torque to the axles. It also incorporates a "smart" exhaust brake feature that helps save wear on the brakes on downhill grades, a feature available on production Sierra HDs.

With the same proven powertrain as production Sierra HD trucks, the All Terrain HD delivers comparable hauling and towing capabilities:
   = Estimated payload capacity of 2,700 pounds (1,225 kg)
   = Estimated conventional towing capacity of 13,000 pounds (5,896 kg)
   = Estimated fifth-wheel towing capacity of 15,600 pounds (7,076 kg).

The GMC Sierra All Terrain HD also features four-wheel drive, with automatic locking front and rear differentials, while the 14-inch, four-wheel disc brake system from the production Sierra HD provides the stopping power for this unique off-roader.

GMC SIERRA ALL TERRAIN HD CONCEPT SPECIFICATIONS
=    Body style / driveline: 5-passenger crew cab, 3/4-ton 4-wheel-drive heavy-duty pickup
=    Construction: body on frame
=    Engine: Duramax 6.6L turbo-diesel
=    Horsepower: 397 hp (296 kW) @ 3000 rpm
=    Torque: 765 Nm (1037 lb.-ft) @ 1600 rpm
=    Transmission: Allison 1000 six-speed automatic
=    Suspension
        front: long- and short-arm independent with torsion bars
        rear: semi-elliptic two-stage multi-leaf spring
=    Steering type: integral power-assisted recirculating ball
=   Brakes (type): power-assisted, Hydroboost brake-apply system, four-wheel disc, four-wheel ABS
=    Brake rotor (diameter x thickness)
        front: 13.97" x 1.57" / 355 x 40 mm
        rear: 14.17" x 1.34" / 360 x 34 mm
=    Wheel size and type: 20 x 9.5-inch aluminum
=    Tire type and size: BFGoodrich KM2 325/60R20
=    Wheelbase: 148.6" / 3774 mm
=    Overall length: 230.9" / 5864 mm
=    Overall width: 83" / 2106 mm
=    Overall height: 81.8" / 2077 mm
=    Track
        front: 73" / 1853 mm
        rear: 73" / 1853 mm
=    Minimum ground clearance
        21.1" / 536 mm (at rocker panels)
        11.8" / 300 mm (at skid plates)
=    Approach angle
        front: 39°
        rear: 31°
=    Maximum payload (est.): 2700 lbs. / 1225 kg
=    Maximum towing capacity (est.)
        ball hitch: 13,000 lbs. / 5896 kg
        fifth-wheel hitch(est.): 15,600lbs. / 7076 kg

Read More

Cadillac SRX, 2012

 

 

 

Cadillac SRX, 2012

A new 3.6L V-6 - the segment's most powerful standard engine - headlines updates to the 2012 Cadillac SRX. It enhances a combination of performance, technology and refinement that is resonating with more luxury crossover customers.

Cadillac SRX retail sales rose 17.7 percent in the first half of 2011, building on a record-setting 2010 sales increase of 150 percent.

The new 3.6L - known by its "LFX" engine code - is the sole engine offered in the Cadillac SRX. It delivers 16-percent more horsepower (308 hp / 230 kW) than the previous V-6 and provides greater low-rpm torque. Vehicle responsiveness is dramatically improved in all operating conditions - launch from a standstill, around town maneuvering in traffic, passing maneuvers and full-throttle acceleration. It is matched with the Hydra-Matic 6T70 six-speed automatic transmission, which features a driver-selectable Eco feature that alters the shift points and throttle progression to help optimize fuel economy.

Cadillac SRX also brings enhanced features for 2012, as well as updates that make it quieter and more refined - including new sound-absorbing material placed strategically throughout the vehicle. The Base and Sport suspension systems have been revised to improve the ride quality.

The feature and content:

•     Standard Bluetooth phone connectivity on all models, with on-screen caller identification
•     OnStar Turn-by-Turn automated directions are loaded to the vehicle
•     Improved voice recognition for phone activation, navigation and radio station changes
•     A heated steering wheel on the Luxury, Performance and Premium Collections
•     Door lock switches on the driver and passenger door panels as well as the center console
•     Cruise control buttons on the steering wheel
•     Memory seat set - the occupant can set the seating position simply by pressing "set" and the number simultaneously
•     Backlighting for map lights in the overhead console
•     A new machined-face finish on the 20-inch wheels, which are standard on Performance and Premium Collections
•     Available all-ebony interior trim
•     One new exterior color: Xenon Blue Metallic.

Popular features returning for 2012 include a moveable cargo fence and large under-floor storage space in the rear, a liftgate that can be programmed to stop at different heights and the UltraView sunroof that covers 70 percent of the vehicle roof.

The new and enhanced elements that contribute to a quieter ride include new acoustic material in the upper instrument panel, front-of-dash area, the center console area and the inner fenders, as well as laminated glass used in the front side glass. There is also a new laminated structural barrier used under the second-row seat to block noise.

Inside the LFX
The Cadillac SRX's new LFX 3.6L direct-injected V-6 delivers an SAE-certified 308 horsepower (230 kW) and 265 lb.-ft. of torque (359 Nm), with efficiency-enhancing features including direct injection and continuously variable valve timing. Peak torque is achieved at only 2,400 rpm and is maintained through 5,300 rpm. The LFX is also E85 ethanol-capable.

The LFX engine is a technically advanced 60-degree V-6 with dual-overhead camshafts, continuously variable valve timing and direct injection. Supporting elements that contribute to its performance, refinement and durability:

•     The cylinder block and cylinder heads are cast in aluminum for low weight.
•     A composite intake manifold saves approximately 5.5 pounds (2.5 kg) over the weight of a comparable aluminum intake. It also has a comparatively small radiated surface area to help it maintain excellent noise and vibration characteristics.
•     An integrated cylinder head/exhaust manifold design saves approximately 13 pounds (6 kg) per engine when compared with a comparable engine with separate head/manifold assemblies.
•     The cylinder heads include four valves per cylinder, with a dual overhead camshaft design incorporating infinitely variable cam phasing.
•     A forged steel crankshaft provides optimal strength in the bottom end, while the connecting rods are made of powdered metal that features a higher ratio of copper, which makes them stronger and enables them to be lighter.
•     The pistons are made of lightweight cast aluminum and feature a friction-reducing polymer coating on the skirts , as well as fully floating wrist pins, which also help reduce friction. Less weight in the pistons means less reciprocating mass in the engine, which in turn means less inertia and greater operating efficiency.
•     Pressure-actuated oil squirters drench the underside of each piston and the surrounding cylinder wall with an extra layer of cooling, friction-reducing oil.
•     A cast aluminum oil pan is stiffer to improve powertrain rigidity and reduce vehicle vibration. It bolts to the transmission bell housing as well as the engine block, eliminating points of vibration. Cast aluminum dampens internal engine noise better than a conventional stamped steel pan and is structurally stiffer.
•     Optimized-flow fuel injectors and the integrated exhaust manifolds/cylinder heads promote lower emissions.

To help achieve their performance goals, the Cadillac SRX's engineers redesigned the exhaust system with dual runners from the engine to a collection point farther rearward in the vehicle. The diameter and length of the pipes were specifically tuned to improve low-end torque from 1,200 to 3,000 rpm.

High-pressure exhaust pulses from each of the cylinders in the engine are timed to arrive at this collection point so that they phase together in a precise way. This tuning effect, which is called scavenging, literally pulls exhaust gases out of the engine by synchronizing high and low pressure pulses from each cylinder. Peak torque now occurs at a very low 2,400 rpm and remains high all the way through 5,300 rpm. The torque and power improvements were achieved while maintaining quiet performance.

The LFX engine is paired with the Hydra-Matic 6T70 electronically controlled six-speed automatic transmission, with tap up/tap down driver control. A wide overall ratio spread of 6.04:1 allows a "steep" first gear, as well as a "tall" overdrive top gear for low-rpm highway cruising. Acceleration is maximized, as is fuel economy. Engine noise is also lower during cruising. Because of the wide ratio spread (6.04:1), first gear is a very high ratio, which provides brisk acceleration from a stop. Sixth, however, is an overdrive ratio, which keeps the engine revolutions as low as possible for highway cruising, reducing engine friction losses and improving fuel economy.

A driver-selectable Eco feature alters the shift points of the 6T70 to enhance fuel economy by up to 1 mpg. A clutch was added to the variable displacement air conditioning compressor to enhance fuel economy. The compressor is only run when needed and provides no drag when turned off.

Chassis and suspension
The Cadillac SRX has a four-wheel independent suspension system and a standard rack-and-pinion hydraulic steering system - and offers a variable-effort, speed-sensitive steering system - with tuning biased for sport sedan-style driving and strong on-center feel. StabiliTrak electronic stability control is standard and works with the standard four-wheel-disc/four-channel-ABS braking system.

The core elements of the chassis and suspension systems include:

•     An independent MacPherson strut suspension system is standard on all models, featuring a direct-acting stabilizer bar and hydraulic ride bushings.
•     An independent "H-arm" rear suspension incorporates a lightweight hollow aluminum lower control arm and a hollow stabilizer bar.
•     Power-assisted rack-and-pinion steering is standard on Base and the Luxury Collections.
•     Power-assisted variable-effort and speed-sensitive rack-and-pinion steering system is standard on the Performance and Premium Collections.
•     A rear axle ratio of 3.39 is standard on all models.
•     A trailering package is available on the Luxury, Performance and Premium Collections and increases the towing capacity to 3,500 pounds (1,587 kg).

For 2012, the Base suspension offers greater ride quality that maintains excellent handling characteristics, thanks to new upper front strut mounts, improved shock valve tuning, new bonded bushings for the front stabilizer bar and new twin-tube rear shocks that provide greater road isolation.

The Sport active suspension - standard on Performance and Premium Collections - is also improved for 2012, with new front upper strut mounts, new shock valving, bonded stabilizer bar bushings and revised calibrations for this continuously variable real-time damping suspension system. Electronically controlled dampers at each corner "read" the road constantly to make real-time adjustments within milliseconds. They deliver the just-right damper rate for all road conditions, for greater comfort and a greater feeling of control. This system also increases damping during aggressive handling maneuvers to reduce the roll velocity and pitch velocity of the vehicle for a more confident feel.

Read More

Cadillac Ciel Concept, 2011

 

 

 

 Cadillac Ciel Concept, 2011

The Cadillac Ciel Concept - pronounced "C-L," the French translation for sky - is a four-seat convertible that opens a new chapter in Cadillac's design and product ascent, pushing the brand's Art & Science philosophy into a new stratum. Ciel is a new expression of Cadillac's historical grandeur, as well as a celebration of open-air motoring.
The spacious and elegant Cadillac Ciel Concept is a grand gesture that explores themes driving Cadillac's explorations into range-topping flagship luxury. It is powered by a twin-turbocharged version of the 3.6-liter Direct Injection V-6 engine, paired with a hybrid system using lithium-ion battery technology.

Coastal inspiration
Driving California's Highway 1 in an open car while the sun sets, from Big Sur north to Monterey, is the type of journey the Ciel team envisioned during its design.

The four-door Cadillac Ciel Concept embraces the social aspects of a recreational journey, with generous room for two couples. It evokes the spirit of the classics with a long, low proportion. The doors are French-style, with the rear doors hinged at the rear - there is no B-pillar - to reveal a sweeping view of the dramatic interior. Distinguishing fender lines run from nose to tail, and nickel-plated bright work accents the body lines, enhancing the visual length of the car and honoring Cadillac touring cars of the past.

The Cadillac Ciel Concept's exterior flows seamlessly into the cabin, with the body color rolling over on top of the interior door panels. Like the exterior, the passenger space is accented with sweeping nickel-plated trim. It divides the body-color upper sections from a complementing beige lower color. Italian Olive wood, machined aluminum and hand-tipped leather are elements that flow through the interior, complementing the primary colors with warm, rich tones.
Cadillac Ciel Concept literally and figuratively reflects the driving experience along the California coastline. The Cabernet paint color, developed specifically for Ciel, is inspired by the rich translucence of a glass of red wine held up to the sunlight.

A prominent, polished aluminum windshield frame serves as in important structural element of the vehicle, as well as aesthetic one, recalling classic open cars of the past. Additional exterior cues, including a shield grille and vertical lighting elements, are pure Cadillac, but suggest a more organic interpretation of the brand's signature design language that emphasizes the artistic and natural sides of it. The body sides, for example, are more rounded, sweeping upward. Bright work is used to bring contrast to the deep paint color, but plays a more supporting role.

The car rides on large, beautifully finished wheels that feature brushed nickel plating over milled billet aluminum, matching the materials and appearance of other trim. Carbon ceramic brake rotors are visible behind the 22-inch rims, a visual clue to the Ciel's foundation of performance.
And owing to Cadillac's heritage of advanced technology, the headlamps and taillamps feature LED lighting elements - including a unique daytime running light graphic on the front of the vehicle that is generated with gradated LED lighting.

Elegant, authentic details
Simplicity, authenticity and spaciousness were the guiding principles when it came to developing the Cadillac Ciel Concept's interior.
A wheelbase of 125 inches - about 12 inches longer than a CTS sedan - provides generous space. Luxurious seats are bisected by a "floating" center console that runs from the instrument panel to the rear of the interior. It effectively creates a very personal space for each passenger and houses access to hidden connectivity portals for each person in the vehicle - allowing them to make dinner reservations, check the weather at their destination or even upload photos of the trip via social media sights.

Simplicity is also the watchword with the Cadillac Ciel Concept's instrument panel, which features a minimalist gauge cluster that doesn't impede or distract from the outward view. But while reserved in its form, it exemplifies Cadillac's attention to details and its priority on authentic materials. The climate vents, for example, are mostly hidden and their airflow is distributed indirectly.

Transparent gauges deliver their information within a detailed, brushed-aluminum housing that has the intricate depth of a high-quality chronograph. They offer dual readouts - analog and digital - as well as an information hierarchy.

The interior features:

•     Sloping bolsters on the seats that allow passengers to slide into the seats more comfortably
•     A personal device storage area on the front of the console with inductive charging and Bluetooth connectivity
•     A power-assisted transmission shifter that deploys as soon as the engine is started
•     Lighting in the armrests that combines a natural light well for daytime driving and ambient lighting for nighttime drives
•     Door storage areas that are inspired by premium fashion accessories and open with high-quality zippers
•     Pull-out blankets are available for all three passengers and retract automatically
•     All the seats have heating and cooling features, along with a drawer containing sun lotion, sun glasses and towels, as well as aromatherapy that is controlled from the rear armrest.

However, perhaps the defining element of the Ciel's cabin is the incorporation of Italian Olive wood on the doors, instrument panel, console and the front seatbacks, adding warmth and craftsmanship to a car designed to provoke an emotional response.
Italian Olive wood is a premium yet sustainable material and the material used in the Ciel came from a single fallen and recycled tree, from a west coast producer of premium olive oil. It was painstakingly prepared, including drying in a kiln, before it was cut for the concept vehicle. The numerous pieces were then photographed so that the grain could be matched precisely. Each component was hand-milled and finished by expert woodworking craftsmen.

Read More

Mini Coupe Concept, 2009

 

 Mini Coupe Concept, 2009

The Mini Coupe Concept is an expression of Mini design and the great ability of the brand's designers to fill the elementary values of the brand with new life, using the options of modern drivetrain and suspension technology, and developing fascinating perspectives for the future of the brand on this basis.

Presenting the concept of an uncompromisingly sporting two-seater to be seen for the first time at the Frankfurt Motor Show (17-27 September 2009), Mini is unveiling an unusually attractive vision of how the model family may well develop in future. The source of inspiration is once again the fundamental motive so characteristic of every Mini: driving pleasure. The Mini Coupe Concept therefore represents the ideal of a car destined in every respect to offer a thrilling experience and make every journey a truly unique thrill.

The Mini Coupe Concept brings together a wide range of features for a truly sporting and ambitious style of motoring. Limited to two seats and following a philosophy of consistent lightweight construction, the car clearly meets all the requirements made of a particularly active and dynamic coupé. Compact dimensions, perfect axle load distribution and a low centre of gravity offer ideal conditions for enhancing the agility typical of Mini to a level never seen before.

The Mini Coupe Concept: an invitation to enjoy spontaneous mobility.
With the growing model portfolio, the popularity of the Mini brand has also grown consistently in recent years. The Mini has moved beyond the restraints of urban mobility, opening up additional options and winning over new target groups. And Mini allows you to enjoy spontaneous mobility, sporting and agile handling and unmistakable style on virtually every occasion.

The current models in the range already meet the most varied demands. As individual characters in their own right, the Mini, Mini Clubman and Mini Convertible all offer a unique rendition of the driving experience so typical of the brand. And now the Mini Coupe Concept brings out driving pleasure in its most concentrated form, extreme lightweight technology making this two-seater particularly agile and unusually efficient. At the same time the low roofline, the precisely defined spoiler edge at the rear and other aerodynamic features enhance the car's performance to an even higher standard. So that in its design and in the use of high-performance drivetrain technology, the Mini Coupe Concept offers ideal conditions as a compact sports car in the premium segment.

The two-seater is designed to accommodate even the most powerful engine currently available in the Mini - and with the 1.6-litre twin-scroll turbocharged power unit carried over from the Mini John Cooper Works, the Mini Coupe Concept offers truly outstanding performance. Maximum output is 155 kW/211 hp, peak torque 260 Newton-metres/192 lb-ft increasing through the Overboost function for a short while to an even more substantial 280 Newton-metres/206 lb-ft. And now the Mini Coupe Concept offers everything it takes to exceed even the supreme performance of the Mini John Cooper Works with this unique power unit.

Fifty years of Mini: a vision of tomorrow marking an anniversary of today.
Fifty years after the launch of the classic Mini, the appeal of the brand is greater than ever before, with the model range exuding sheer fascination wherever you go. And now, in the anniversary year of the brand, Mini is bringing together this unique tradition and the successful model range offered today with even greater creativity and technical innovation for a truly promising future.

The Mini Coupe Concept is a further milestone in this ongoing development of the brand. The car takes up elementary strengths of the Mini and, through its modern technology and an innovative body concept, offers new standards and characteristics never seen before. So that the Mini Coupe Concept offers many new highlights in adding yet a further character to the existing model range.

Exterior design: the look typical of Mini but with individual character.
The body design of the Mini Coupe Concept also bridges the gap from the earliest days of the Mini's history all the way to the more distant future of the brand, emphasising the unique nature of the concept as well as its full membership in the Mini family. At the same time the individual and emotional design language arouses the expectation of a particularly thrilling experience on the road.

Especially at the front end of the car a number of icons typical of the brand, as well as the design style so characteristic of Mini, all come together to create a strong family resemblance. In addition, the individual look of the Mini Coupe Concept comes out also in the side view of the car as well as in the design of the rear end.

The typical Mini look in particularly sporting style.
The new concept car carries over the unmistakable front end look from the four-seater Mini. Smoothly balanced contours on the engine lid characterised by wide and sweeping radii, the large headlights, the homogenous shape of the radiator grille and the wide lower air intake give each model that unique look, openness and charm so typical of the brand. Through the greater rake of the windscreen on the Mini Coupe Concept, the car looks even more striking and dynamic, the low and streamlined body proving clearly that the Mini Coupe Concept is a particularly outstanding performer.

The hexagon radiator grille and the large round headlights are unmistakable design features re-interpreting the front view of the classic Mini in particularly modern style. The direction indicators are integrated in the headlights, just above the innovative three-dimensional surrounds for the positioning lights and the foglamps. The entire front air dam has been adjusted to the sporting look of the car, standing out even wider and more striking than before.

The chrome radiator grille on the Mini Coupe Concept is the same as on the Mini Cooper S. The inner section in the grille is however finished with bars in body colour creating a clear sign of distinction at very first sight from the other members of the Mini family. The bonnet stripes also extend into the radiator grille to provide an even more sporting and dynamic touch.

With its very dynamic curvature and the stylised opening, bearing testimony to the power of the engine lurking within, the front lid likewise comes in the same look as on the particularly powerful versions of the Mini.

Individual roofline as a sign of sporting presence.
The side view of the Mini Coupe Concept also brings together features typical of the Mini family and new highlights in design to form a fascinating whole. The front side panels, for example, come straight from the Mini Convertible. The body joint forming the diagonal line characteristic of every Mini along the front lid and the surrounds on the front side indicators bearing out the style of the Mini Cooper S again provide an unmistakable sign of distinction with historic roots - here the classic Mini had a visible welding seam along the body.

The familiarity in design resulting from these features forms an attractive contrast to the far greater rake of the A-pillars leading into the brand-new, sweeping line of the roof.

Large wheels and a high waistline already give the Mini, the Mini Clubman and the Mini Convertible a particularly powerful and sporting look, with the black strip around the lower section of the body underlining this compact appearance and short body overhangs front and rear emphasising the athletic stature of the car and bearing testimony to that typical go-kart feeling at very first sight.

The rear-end design of the Mini Coupe Concept consistently follows the need to optimise the flow of air in the interest of both driving dynamics and efficiency. The principle of "form follows function" so essential to Mini, the look and design of various body elements, fully reflects the characteristic features and qualities of the car. Through its design alone, therefore, the Mini Coupe Concept clearly confirms its sporting potential in a particularly credible and convincing manner.

The rear spoiler with its wing profile at the same level as the C-pillar also makes a particularly effective contribution in guiding the air along the rear end of the Mini Coupe Concept. This large air guidance element spans the entire width of the roof, increasing aerodynamic downforce on the rear axle.

Tapering down elegantly, the rear window on this unique two-seater merges into a short and low rear end with staged contours in typical coupé design. Again, this follows the overriding objective to ensure an optimum flow of air without any turbulence harming the car's aerodynamics - which is also why the air spoiler on the rear panel is appropriately sharp and clear in its profile.

Beneath the air spoiler at the rear the overall look and design of the Mini Coupe Concept follows the typical philosophy of the brand. Horizontal lines running parallel to one another emphasise the wide track of the car, the body growing wider from top to bottom in cascading style highlighting the muscular stance of the car resting on its wheels in that characteristic style.

The rear light clusters in upright arrangement and surrounded by a wide chrome frame are also typical of the brand. The rear air dam on the Mini Coupe Concept, in turn, comes with a diffuser split up into two sections and ensuring a smooth, swirl-free flow of air beneath the car.

Impressively functional: wide-opening tailgate, generous luggage space.
The tailgate on the Mini Coupe Concept is yet another highlight of the car. Deliberately foregoing the rear seat bench, this unique two-seater offers lots of additional space for taking along all kinds of luggage.

Luggage capacity is 250 litres or 8.8 cu ft. To use this space most conveniently, the rear end of the Mini Coupe Concept comes with a large and wide-opening tailgate. Hinged above the roof spoiler, the entire tailgate including the rear window swings up gracefully, offering convenient access to the generous luggage space behind the rear seats of the car. And thanks to the low loading sill, accessing the luggage compartment with even heavy and bulky objects is significantly easier.

Interior: sports car ambience with an exclusive range of colours and materials.
The Mini Coupe Concept combines the vision of a compact sports car with thrilling agility, on the one hand, and the individual flair and style of the Mini, on the other. Through its entire concept, the car is perfectly designed to offer concentrated driving pleasure of the highest standard. This is borne out not only through the extroverted exterior in its fascinating, sporting look, but also through the interior conceived from the start for active motoring.

Wide-opening doors give the driver and passenger convenient access to the interior, where they enjoy sports seats with strongly contoured side supports for a secure seating position even in particularly fast bends. A three-spoke leather sports steering wheel with multifunction buttons enables the driver to steer precisely into bends and control the audio or communication functions with maximum ease. All other control units, in turn, are arranged ergonomically on the dashboard, taking their frequency of use into account.

The breakdown of the cockpit, the dashboard and centre console again follows that special interior design so typical of Mini. Horizontal lines and air vents placed far to the outside emphasise the sheer width of the instrument panel and, at the same time, the generous style of the interior, the slender centre console giving the driver and passenger maximum legroom. The structure of the door linings so typical of the brand, finally, has also been re-interpreted, with the elliptic main element now completely closed in.

The Mini Coupe Concept also comes with a large rev counter directly behind the steering wheel, while the speedometer is part of the central instrument in the upper section of the dashboard. This circular instrument well known as the Center Speedo also houses the audio system as well as the optional entertainment and navigation functions.

Two Chronoswiss clocks to the right and left of the rev counter provide a close link to earlier concept cars by Mini, bridging the gap between the analogue age of the classic Mini and the digital age of the Mini. One clock is a purpose-built stopwatch for taking lap times, the second clock shows the time in classic style.

The colours and materials featured inside the Mini Coupe Concept symbolise the classic sportiness of the car. Like the dashboard, the roof lining of this unprecedented two-seater comes in black providing a calm atmosphere just right for concentrating on driving conditions and essential requirements. Black trim bars combined with a carbon interior trim strip, finally, further enhance this purist look.
Lightweight construction and modern suspension technology providing a new feeling of go-kart driving.

The Mini Coupe Concept is definitely a Mini and definitely a sports car. The particular charm of this combination results from both the drivetrain and the suspension technology already featured in the current production models, as well as the special highlights of this two-seater concept car.

EPS Electronic Power Steering with speed-related power assistance, finally, ensures precise manoeuvring round bends and gives the driver exact feedback at all times on road and driving conditions. At the same time on-demand management of steering assistance serves to maximise the car's efficiency.

The Mini Coupe Concept offers ideal conditions for raising the go-kart feeling created by the car's drivetrain and suspension technology to an even higher standard. Its entire construction is based on a lightweight concept reducing weight particularly where it really counts for even greater agility. As an example, this two-seater comes with an aluMinium roof not only optimising the overall weight of the car, but also lowering the car's centre of gravity for a significant reduction of body movement and optimised driving behaviour.

Traditional values, modern quality, progressive concept.
Sporting success and agile handling of the highest standard are significant highlights in the history of Mini now going back five decades - and both factors have made a fundamental contribution to the ongoing popularity of this small premium car.

Three overall wins in the Monte Carlo Rally and the concept of driving pleasure expressed so clearly by the car's go-kart feeling definitely confirm the sporting potential of this small compact both back then and today. The anniversary year is therefore the ideal time to present the Mini Coupe Concept as the vision of an uncompromisingly active sports car.

Read More

Volks Wagen Buggy Up Concept, 2011

 

 

 

 

Volks Wagen Buggy Up Concept, 2011

A buggy is more than just a car; it is an automotive lifestyle feeling. It was born in California in the 1960s and was based on the Beetle, which provided the engine and the chassis. The rest was created by buggy pioneers such as American Bruce Meyers: out of GRP, or glass-reinforced plastics. Buggies have had a cult following that continues to today. That is reason enough for Volkswagen to now present a 21st century buggy concept based on the new up!: the buggy up!. This buggy is not made of GRP, but instead of strong, high-tech, lightweight construction steels. Yet, the conceptual approach for developing the two-seater, as original as it is, still follows the lead of historic models from California.

The underbody, running gear and drive technology of the up! were kept, while the roof-less exterior skin of the body was completely redesigned, and the ride height was lowered by 20 mm. Nonetheless, the design of the buggy up! with its headlights, the position of the VW badge - and signature trait of the front bumper that appears to smile - all tie the car to the two-door up!. Yet, everything is different: the bonnet is built much flatter, the bumpers show an independent character, the roof is not just clipped off, rather it takes its idea from small convertible sports cars. The rear section was also completely redesigned. This is logical, because the buggy up! does not have a boot like the "normal" up!, nor does it have any C-pillars. However, it is immediately recognisable as an up! by its rear lights, which are like a reflection of the headlights. Practical: the bootlid is constructed of two pieces; the main part of the lid lifts upward like a classic bootlid, but the section above the bumper folds down, like the tailgate on a pick-up. And this makes it extremely easy to stow even heavy and bulky items. On top of the lid, there are also tie-down straps for a set of luggage.

The Safe
The designers also made this up! a purebred buggy in its side profile. Of course, it has no doors, but in their place it has extensive body reinforcements and a sturdy roll bar behind the two seats. Especially cool: the open side sills. This makes the experience of open-air driving even more exciting than in a conventional convertible.

Snappy
At 3,584 mm, the buggy up! is somewhat longer than the production up! with a hard top (+44 mm), and its width of 1,672 mm is somewhat wider (+31 mm). As might be expected, the height of the buggy up! comes in significantly lower at 1,288 mm (-190 mm). The minimalistic overhangs, front and rear, show sharp styling. Filling the wheel housings are 18-inch alloy wheels - enormous for a vehicle of this size - which have 205/40 tyres.

The Colourful
The area above the bumper and the open side sills are in the colour "hot orange", which was specially created for this vehicle; those who think back to the buggies of the 1960s when they hear this colour name are right on track. The bumpers and side sills are designed in a matt and rugged "metallic grey" colour. The same colour schemes dominate in the interior.

The Waterproof
As is proper for a beach vehicle, the new interior styling is completely waterproof. Drains in the vehicle floor and the open side sills prevent flooding. Even the neoprene coated shell seats have water drains, so that no water accumulates in the vehicle after a swim in the ocean. If it should rain for a longer period of time, it is possible to stretch a sail between the window frames and the roll bar.

The Sound
The controls for the infotainment system also sport a waterproof design. Among its features, the system has an iPod/iPhone dock. The entire module can be removed - including the integrated active loudspeakers - so that it can be used as a sound system for parties on the beach.

The Go-kart
Compared to the two-door up! the buggy up! has a lower seat position - in keeping with the lower vehicle height. The specially designed seats were lowered by 58 mm compared to the production model. To ensure that everything makes ergonomic sense for the driver, engineers reduced the basic angle of the height-adjustable steering wheel by 4 degrees to an angle of 21 degrees. The result is a go-kart feeling. A sturdy handle is installed on the dash panel for the front passenger - just as it once was in the Beetle - because one never knows what lies over the next dune. In essence, the buggy up! is pure emotion, but it is easy to drive and very safe. A car that would not only be good to drive in California.

Read More

Volkswagen Amarok, 2011

 

 

Volkswagen Amarok, 2011

The production of the Volkswagen Amarok is about to start at the Volkswagen factory in Buenos Aires.
The Volkswagen Amarok has a generous payload capacity of up to 1.15 tonnes and maximum towing limit of 2.8 tonnes. Its 2.52 m² cargo area has the largest dimensions in its class at 1,555 mm long and 1,620 mm wide, plus a best in class width between the wheelarches of 1,222 mm, which means that for the first time on a mid-size pick-up, it is possible to load Euro pallets sideways, saving on space.

The official photos show the Volkswagen Amarok reflects the latest Volkswagen design DNA with frontal styling in line with the latest Transporter and Golf. It is 5.25 m long with a ladder frame chassis and will be offered with a choice of rear-wheel drive and switchable or permanent 4MOTION all-wheel drive.

The maximum convenience, the switchable all-wheel drive is engaged by the push of a button, and also has low off-road gearing.

The full-time all-wheel drive version is a rarity in the pick-up sector, and uses a Torsen differential to distribute drive at a 40:60 ratio to the front and rear axles for excellent vehicle dynamics and high traction, and also ensures that the wheel with the best traction always gets the most power. 

Designed to tackle the toughest off-road terrain, the VW Amarok is offered with an electronic differential lock (EDL) and Off-Road ABS to significantly shorten braking distances in off-road conditions or gravel roads. At speeds of under 20 mph it also activates Hill Descent Assist to control hill descents by using selective braking interventions. Furthermore, the ESP Plus system includes Hill Hold Assist, which prevents the vehicle from rolling back by holding it in place on inclines until the driver presses the accelerator pedal.

Under the bonnet there will be a choice of two 2.0-litre fuel-efficient, Euro5 compliant, common rail TDI engines producing 163 PS, with torque of 400 Nm at a low 1,500 rpm, or 122 PS with maximum torque of 340 Nm from 2,000 rpm.

Both engines have a 6-speed manual transmission and will have impressive fuel economy with low emissions to make the Volkswagen Amarok the first all-wheel drive pick-up in this class offering CO2 emissions of less than 200 g/km.
Like the new Transporter and Caravelle, the Volkswagen Amarok has a gearchange indicator to help drivers achieve the best fuel economy, which with an 80-litre fuel tank should offer a range of over 600 miles.

The large and ergonomically designed interior is the largest in its class and in many ways resembles that of a Volkswagen passenger car. Easy entry, lots of headroom and ample legroom for passengers on the rear bench seat make the Volkswagen Amarok a fully-fledged five-seater. If only two people are travelling, interior storage space can be increased by folding the rear seat.

The Volkswagen Amarok.

Production of the Volkswagen Amarok is about to start at the Volkswagen factory in Buenos Aires.
The Volkswagen Amarok has a generous payload capacity of up to 1.15 tonnes and maximum towing limit of 2.8 tonnes. Its 2.52 m² cargo area has the largest dimensions in its class at 1,555 mm long and 1,620 mm wide, plus a best in class width between the wheelarches of 1,222 mm, which means that for the first time on a mid-size pick-up, it is possible to load Euro pallets sideways, saving on space.

The official photos show the Volkswagen Amarok reflects the latest Volkswagen design DNA with frontal styling in line with the latest Transporter and Golf. It is 5.25 m long with a ladder frame chassis and will be offered with a choice of rear-wheel drive and switchable or permanent 4MOTION all-wheel drive.

For maximum convenience, the switchable all-wheel drive is engaged by the push of a button, and also has low off-road gearing.

The full-time all-wheel drive version is a rarity in the pick-up sector, and uses a Torsen differential to distribute drive at a 40:60 ratio to the front and rear axles for excellent vehicle dynamics and high traction, and also ensures that the wheel with the best traction always gets the most power. A rear differential lock is available.
Volkswagen Amarok

Designed to tackle the toughest off-road terrain, the VW Amarok is offered with an electronic differential lock (EDL) and Off-Road ABS to significantly shorten braking distances in off-road conditions or gravel roads. At speeds of under 20 mph it also activates Hill Descent Assist to control hill descents by using selective braking interventions. Furthermore, the ESP Plus system includes Hill Hold Assist, which prevents the vehicle from rolling back by holding it in place on inclines until the driver presses the accelerator pedal.

Under the bonnet there will be a choice of two 2.0-litre fuel-efficient, Euro5 compliant, common rail TDI engines producing 163 PS, with torque of 400 Nm at a low 1,500 rpm, or 122 PS with maximum torque of 340 Nm from 2,000 rpm.

Both engines have a 6-speed manual transmission and will have impressive fuel economy with low emissions to make the Volkswagen Amarok the first all-wheel drive pick-up in this class offering CO2 emissions of less than 200 g/km.
Like the new Transporter and Caravelle, the Volkswagen Amarok has a gearchange indicator to help drivers achieve the best fuel economy, which with an 80-litre fuel tank should offer a range of over 600 miles.

The large and ergonomically designed interior is the largest in its class and in many ways resembles that of a Volkswagen passenger car. Easy entry, lots of headroom and ample legroom for passengers on the rear bench seat make the Volkswagen Amarok a fully-fledged five-seater. If only two people are travelling, interior storage space can be increased by folding the rear seat.

Read More