Audi RS5, 2012

 

 

 

 

•  Audi RS5, 2012

The Audi RS5 Coupé is the star athlete of the A5 family. It offers the power and handling of a powerful sports car packaged in the body of an alluringly elegant coupe. The design has now gained several new, sharp accents, with numerous features that characterize the other A5 models also making their way to the RS5.

The Audi RS5 Coupé uses a high-revving, normally aspirated V8 displacing 4,163 cc. This engine is closely related to the V10 that powers the R8 high-performance sports car. The 4.2 FSI delivers 331 kW (450 hp) at 8,250 rpm, with the peak torque of 430 Nm (317.15 lb-ft) available between 4,000 and 6,000 rpm. The engine has a specific output of 108.1 hp per liter of displacement. The potent response, the eager revving and the rich, melodious sound mark the V8 as a thoroughbred racing engine.

Hand-built at the plant in Györ, Hungary, the 4.2 FSI launches the Coupé from zero to 100 km/h (62.14 mph) in 4.6 seconds. Audi will increase the electronically governed top speed from 250 to 280 km/h (155.34 to 173.98 mph) upon request. Thanks to the combination of technologies from the Audi modular efficiency platform, which also includes a recuperation system, the high-tech V8 consumes significantly less fuel on average than its direct competitors.

With its high efficiency and its long top gear, the standard seven-speed S tronic also contributes to the good fuel economy. Drivers can let the lightning-fast dual-clutch transmission shift automatically or change gears themselves using the selector lever or with paddles on the steering wheel. The integrated launch control program provides for rocket-like starts by managing the engagement of the clutch at mid-level revs.

High end: quattro with crown-gear differential
Like all RS models, the Audi RS5 Coupé also applies its power to the road with quattro permanent all-wheel drive. The crown-gear center differential at its heart is compact and lightweight. It can vary the distribution of torque between the front and rear axles lightning-fast and over a wide range, with up to 70 percent flowing to the front or as much as 85 percent to the rear, as necessary. The default 40:60 ratio of the rear-biased configuration ensures sporty handling.

The crown-gear center differential works together with the torque vectoring system, which acts on all four wheels. If the load on the inside wheel is reduced too much while the car is being driven dynamically, that wheel is braked slightly before it can begin to slip. Audi offers the sport differential as a complementary option that actively distributes the power between the rear wheels via two superposition stages.

Precise and stable: the chassis
The chassis of the Audi RS5 Coupé unites fast and precise turn-in, high cornering speeds and supreme stability. Most of the components of the five-link front suspension and the self-tracking trapezoidal-link rear suspension are made of aluminum. The new speed-dependent power steering is an electromechanical system with a direct steering ratio for highly precise road feel. It supports the driver with slight steering corrections when braking on surfaces with different amounts of grip. Because the power steering draws no energy when driving straight ahead, it helps to enhance efficiency.

The taut setup lowers the body by 20 millimeters (0.79 in) compared with the Audi A5. Newly designed, 19-inch forged aluminum wheels with 265/35-series tires are standard; 20-inch wheels with 275/30-series tires are available as an option for the high-performance coupe.

The brake system of the RS Coupé features large, internally ventilated wave brake discs, with the front discs measuring 365 millimeters (14.37 in) in diameter. The steel friction rings with their wave-like outer contour are perforated and connected to the aluminum brake caps via pins. This direct structure reduces tensions, quickly dissipates the heat and prevents the transmission of temperature peaks. Moreover, the redesigned shape of the friction rings results in three kilograms (6.61 lb) of weight being saved in total, thus improving the balance of unsprung masses.

The calipers are painted high-gloss black; the front calipers have eight pistons each. The Audi RS5 can be optionally equipped with carbon fiber-ceramic discs up front. The electronic stabilization program (ESP) integrates a sport mode and can be switched off entirely.

Upon request, Audi equips the RS5 with a particularly dynamic damping technology - the sport suspension plus with DRC dynamic ride control. The diagonally opposed pairs of shock absorbers are linked by hydraulic lines and a central valve. During fast cornering, the system intensifies the stabilization of the front outside wheel. The sport suspension plus features a three-stage, variable damping characteristic.

The Audi drive select driving dynamics system comes standard with the RS5 Coupé. This system allows the driver to select between three modes - comfort, auto and dynamic - for the characteristics of the steering, the seven-speed S tronic and the accelerator. And if the car is equipped with an Audi MMI navigation system, there is also a fourth mode - individual - which can be configured by the driver. Audi drive select can also modulate the sound of the exhaust system, double-clutching when downshifting in dynamic mode.

Dynamic steering is another module available for Audi drive select beside the sport differential and the damping characteristic in the sport suspension plus. It uses a superposition gear to vary the steering ratio by nearly 100 percent as a function of speed and countersteers slightly at the cornering limit.

Unmistakable: The design
The Audi RS5 Coupé has an athletic road stance, and its classically elegant two-door lines dazzle with clear-cut accents. The new single-frame grille with beveled upper corners features a high-gloss, anthracite gray honeycomb structure and a matt aluminum-look frame. The standard xenon plus headlights are framed by narrow strips of LED daytime running lights. The air flows through large openings embedded in a distinctive bumper featuring a splitter edge like on a racing car. Sharper edges make the engine hood appear more three-dimensional so that the RS5 looks even lower and wider when viewed from the front.

The flared aluminum front fenders and the rear side elements with the sharp horizontal upper edges are reminiscent of two classic Audi models from the 1980s - the all-wheel drive pioneer Audi quattro and the Sport quattro. The side sills sport chiseled caps; the trim strips and the side mirror housings have a matt aluminum-look finish.

The tail end is dominated by the two oval exhaust pipes of the dual exhaust system, which are integrated into the redesigned bumper. Audi also offers a sport exhaust system with a more voluminous sound and black exhaust tip bezels. The LED rear lights are also new and feature continuous light strips. The large diffuser extends far upward, and the spoiler in the rear hatch extends automatically at 120 km/h (74.56 mph).

The extensively clad underbody integrates air vents for the seven-speed S tronic and the front brakes. Thanks to its advanced aerodynamics, the Audi RS5 Coupé generates downforce at high speed to further enhance stability.

The dynamic looks alter the dimensions slightly. The Audi RS5 Coupé is 23 millimeters (0.91 in) longer and six millimeters (0.24 in) wider than the A5 Coupé, but six millimeters (0.24 in) lower. Eight exterior colors are available, from solid, metallic and pearl effect finishes to a specially pigmented crystal effect paint.

Dynamic elegance: The interior
The vehicle's dynamically elegant styling also extends to the interior. The standard sport seats with integrated headrests are power adjustable and covered in a combination of black leather and Alcantara. Audi also offers seat upholstery in Fine Nappa leather in a choice of black or lunar silver, both subtly accented with rock gray piping. Other options include bucket seats with folding backrests or comfortable, climate-controlled comfort seats with a ventilation function. The interior is bathed in black, with narrow chrome clasps at the switches and control elements providing delicate accents. Inlays are available in a choice of carbon, brushed or etched aluminum, a high-gloss piano finish or a light-colored stainless steel mesh.

The new leather multifunction sport steering wheel with its thick rim is flattened at the bottom and features a new, even easier control concept. The ignition key and the shift lever knob have also been redesigned. Even the steering column stalks have been updated. The instruments have black gauges and white lettering with special scaling. When the ignition is turned, the red needles of the speedometer and tachometer run quickly up to the limit before returning to zero for a touch of sporty flair. Typical of all RS vehicles, the door openers are two delicate bars.

The driver information system with color display includes an RS menu with a lap timer and an oil thermometer. It displays a special RS welcome screen when the car is started. A piano-finish fascia in the instrument panel frames the instrument cluster. The pedals, the footrest and the buttons of the optional MMI navigation systems shine in an aluminum-look finish. Aluminum inserts adorn the door sill trims, which are accentuated with RS5 badges.

Audi also offers numerous exclusive features for the interior. A carbon design package is available for the engine compartment, as are a variety of styling packages for the body in black or matt aluminum look. A broad range of high-performance assistance and communication systems round out the optional extras program. Among these are adaptive cruise control, Audi side assist, adaptive light, MMI navigation plus, the Bluetooth online car phone and the Bang & Olufsen sound system.

Read More

Citroen DS4 Racing Concept, 2012

 

 

 

• Citroen DS4 Racing Concept, 2012

Citroën has sold more than 180,000 DS line models worldwide since launch. The adventure continues at the 2012 Geneva Motor Show with the reveal of the Citroën DS4 Racing Concept. As with the DS3 Racing, the engineers at Citroën Racing and the styling team have firmly stamped the DS4 with the image of the Brand's racing department.

Making its world debut at the 2012 Geneva Motor Show, the Citroën DS4 Racing Concept features "100% Racing" attributes. The chassis is 35 mm lower than the regular model and track is 55 mm wider at the front and 75 mm wider at the back. The concept car also sports an air diffuser, a front bumper panel, a lower-body belt line and wing extensions. Citroën Racing has tweaked the 1.6-litre turbo engine to develop 256 bhp, or 160 bhp per litre - a record for a series-production car. This spectacular performance comes hand in hand with controlled CO2 emissions of 155 g/km.

The Citroën Racing engineers have also redeveloped the running gear with the utmost precision. The concept car is equipped with four-pot, fixed calliper brakes at the front, with special discs widened to 380 mm in diameter, and shod with larger, 19-inch wheels (235/40).

Other stand-out feature of the Citroën DS4 Racing Concept is its matte grey, textured-effect paint - a first in the automotive sector. The grain of the paint catches the light differently and further enhances the body styling, while the colour is sober, modern and robust and ideally suited to a sports car. To refine the exterior aesthetic, the concept car gets a two-tone roof and specially-designed, twotone wheel rims.

Read More

Kia Trackster Concept, 2012

 

 

• Kia Trackster Concept, 2012

The Kia Trackster Concept unveiled at the 2012 Chicago Auto Show, car enthusiasts begin to salivate. Amid the driving rhythm of heavy-metal music, smoke and blinding lights, Kia Motors America (KMA) took the wraps off a performance-oriented three-door Soul coupé concept that hints at what could possibly be the future of Kia's wildly successful Soul.

Mission accomplished
The bold attitude Kearns refers to starts with the eye-catching Whiteout and Inferno Orange paint scheme. While the white portrays complex layers and shades that contribute to dramatic depth, the orange is perfectly suited for racing. Kia's signature grille features an air intake slit and is trimmed in lightweight carbon fibre. Smoothly integrated head lights sweep back suggestively over the sculpted front-wheel arches. The deeply recessed lenses echo the trapezoid themes found throughout the Kia Trackster Concept and are accented with compelling LEDs.

Most striking up front is the Trackster's lower intake grille. Flanked by immense LED driving lights with billet aluminium surrounds, the Trackster is capable of devouring prodigious amounts of air to keep the engine running cool even under the most gruelling conditions. The lower valance, trimmed in carbon fibre and accented with Inferno Orange, rides just inches off the ground and lends to the car's menacing stance.

The Kia Trackster Concept is not just another pretty face; it has a body to match. Sculpted surfaces seem to flow into each other naturally. The flanks are smooth but accented with well-defined wheel enclosures. Tucked beneath the Trackster's hips are custom HRE-K1 monoblock billet performance wheels that were a joint effort of Kia's California design team and HRE. The wheels are wrapped in 245/40-19-inch front and massive 285/35-19-inch rear Michelin Pilot Sport PS2 high-performance tyres.

The wheelbase on the concept is stretched to 101.2-inches, almost an inch longer than the production Soul. As expected on a car with the Trackster's performance intentions, large 14-inch Brembo vented and cross-drilled disc brakes are embraced by six-piston callipers up front and 13.6-inch discs are paired with four-piston calipers at the rear.

Soul fans will instantly recognize the Trackster's angled roof, accented with Inferno Orange. Closer inspection reveals this concept, while Soul inspired, is missing the production car's rear doors. The front doors have been lengthened and adorned with smooth billet push-style handles which echo the racing-inspired billet fuel filler door. Carbon fibre lower side valances are also accented in Inferno Orange and incorporate functional rear-brake cooling ducts. The rear hatch incorporates a horizontal Inferno Orange "backpack" panel that accentuates the Kia Trackster Concept's 75.5-inch width, which is more than 5-inches wider than a production Soul.

Performance on road and track
With performance as the top priority, the Trackster rolls into Chicago with a concept drivetrain sure to kick start any driving enthusiast's heart. KMA's design team dreamed big, but also kept their vision firmly rooted in reality. A 2.0-litre turbocharged in-line-four engine puts 250 horsepower to the road, a 66 per cent increase over that of the production Soul. Power is routed to all four wheels via an electronically controlled four-wheel-drive system. The short-throw six-speed manual transmission is capped with a stubby spherical shift lever. The Trackster rides on a lowered sport suspension tuned for track performance.

Opening the driver's door reveals a light and airy interior highlighted with deeply bolstered Inferno Orange suede-covered racing seats. Granite Grey leather envelopes the interior landscape and imparts a feeling of strength and stability. Granite Grey suede wraps the sport steering wheel and door panels. Located deep within red-glowing nacelles, the primary instruments are large and easily readable. Auxiliary vehicle information such as oil temperature and battery voltage is found atop the dash panel while navigation, entertainment and ventilation controls are accessed through a large touch-screen panel located just above the engine Start/Stop push-button.

Behind the front seats is where Kia Trackster Concept takes a significant step away from its Soul stable mate. The rear seats have been removed and replaced with a fully integrated equipment tray and spare-tyre well. The idea was to make the tools and equipment necessary to keep the car performing in top condition easily accessible." Large panelled bins stow racing gear such as helmets, suits, gloves and tools while emergency supplies are housed within a separate and highly visible Inferno Orange container. A custom rear strut brace incorporates a quick-release handle to allow for fast wheel changes.

Read More

Jaguar XKR-S Convertible, 2013

 

 

 

•  Jaguar XKR-S Convertible, 2013

The pinnacle of the Jaguar sporting range - the XKR-S - is now joined by a convertible which offers the same enticing blend of abilities, while offering driver and passenger a heightened connection with their surroundings.

The Jaguar XKR-S Convertible embodies all the characteristics that have always defined legendary Jaguar GTs - explosive performance, involving handling, relaxed comfort and discreet luxury - while taking Jaguar into a new performance echelon. The new XKR-S model line-up sits at the pinnacle of the XK range, which now consists of XK, XKR and XKR-S derivatives in coupe and convertible format.

The Jaguar XKR-S Convertible takes the raft of performance, dynamics, design and interior upgrades already introduced to much acclaim on its coupe sibling to create Jaguar's fastest ever open-topped GT.

Adrian Hallmark, Jaguar Global Brand Director, says the new XKR-S Convertible represents the pinnacle of performance and glamour in motoring: "There is nothing as liberating as life behind the wheel of an open-topped Jaguar and the new XKR-S Convertible takes the Jaguar GT experience to new heights."

The building block for the car's explosive performance is an uprated version of the 5.0-litre supercharged AJ-V8 engine, which produces 550PS (405kW) and 502lb/ft (680Nm) of torque. These figures represent a power increase of 8 percent and torque increase of 9 percent over the Jaguar XKR. Driving the rear wheels through a six-speed automatic gearbox with Active Differential, this propels the Jaguar XKR-S Convertible to 60mph in 4.2 seconds (0-100km/h in 4.4 seconds) and on to an electronically limited top speed of 186mph (300km/h).

Underpinning this potent performance is a comprehensive package of suspension upgrades which refine the XK's dynamic abilities still further, creating an intimate connection between the car, the driver and the road, enhanced still further in this open-topped GT.

The lightweight aluminium structure of the XK has huge torsional rigidity, allowing the fitment of suspension components such as a redesigned aluminium front steering knuckle and revised rear geometry, stiffer springs and dampers. Allied to lightweight forged wheels and recalibrated steering settings this has allowed Jaguar's vehicle dynamics experts to create a supremely agile, connected driving experience with no loss in refinement.

Reflecting the car's uprated dynamic abilities are interior and exterior styling changes. Externally the Jaguar XKR-S Convertible is dramatically differentiated from other XK models with carefully calibrated aerodynamic aids that allow it to perform flawlessly at very high speeds.

This sense of drama is continued inside the car with Jaguar Performance seats that feature increased support for driver and passenger during high-speed cornering. The seats are finished in carbon leather and feature 16-way adjustment and heating while carbon is also used to trim the cabin and emphasise the car's assertive nature.

Design
Extensive Computational Fluid Dynamics, wind tunnel and track work has resulted in the aerodynamic design changes applied to the Jaguar XKR-S Convertible. These perform an essential function in maintaining stability in an open-topped car capable of speeds as high as 186mph (300km/h).

These aerodynamic design changes give the front of the car a dramatic and bold appearance. Vertical feature lines run down from the edges of the oval air intake into a new bumper design which incorporates a wider, lower air intake, a carbon fibre splitter and twin side nacelles. At the edges of the bumper, vertical panels channel air down the side of the car along new sills, which serve to both smooth the horizontal airflow and emphasise the 10mm reduction in ride height.

A unique rear wing with a carbon fibre inlay works in conjunction with a rear apron featuring a carbon fibre diffuser. The result is a reduction in overall lift of 26 percent and balanced aerodynamics front and rear to keep the car perfectly pinned to the road.

The exterior changes are highlighted by the application of gloss black to the exterior brightwork, complemented by the dark technical finish of the lightweight, forged 20" Vulcan design alloy wheels through which can be seen the Jaguar High Performance Brake calipers finished in either an eye-catching red or discreet gunmetal. The Jaguar XKR-S Convertible is available in a range of six colours, including Polaris White and British Racing Green, a tribute to Jaguar's competition heritage. The acoustically treated hood opens and stows in just 18 seconds and has been proven at the car's maximum speed. It comes in black as standard with a further six optional colours available.

Performance
The engineering integrity of the acclaimed AJ-V8 petrol engine, now in its third generation, meant that Jaguar's engineers could derive the extra power and torque needed for the XKR-S. The advanced design of the quad-cam, all-aluminium AJ-V8 incorporates spray-guided direct injection and variable valve timing for great efficiency as well as prodigious power. The Roots-type twin-vortex supercharger nestling in the 'V' of the engine has twin intercoolers and is 20 percent more thermodynamically efficient than its predecessor.

The result is 550PS and 680Nm, allowing the Jaguar XKR-S Convertible to accelerate from a standstill to 60mph in just 4.2 seconds (0-100km/h in 4.4 seconds) and on to an electronically limited top speed of 186mph (300km/h).

Liberating an extra 40PS and 55Nm over and above the XKR entailed remapping the fuelling characteristics and increasing exhaust gas flow though the use of an active exhaust system.

With the roof lowered on the Jaguar XKR-S Convertible the Performance Active exhaust system delivers an authentic, race-car inspired soundtrack that has been tuned to provide the driver with a thoroughly exhilarating driving experience.

Dynamics
With the XK model designed as a convertible from the outset, Jaguar's engineers were able to apply the changes that created the Jaguar XKR-S Coupe into the open-topped GT without compromising performance, agility or refinement.

Jaguar pioneered the use of aluminium in series production cars and it is this metal's low mass and high tensile strength that gives the XKR-S such a breadth of abilities. A kerb weight of 1795kg and torsional rigidity of 16,500
Newton metres per degree provide Jaguar's engineers a solid foundation on which to apply the detail changes that create the company's most involving convertible ever.

Both front and rear suspension systems have been revised. A new aluminium steering knuckle in the front double wishbone suspension increases camber stiffness by 23 percent to provide even greater levels of steering accuracy and feedback. To increase stability and control, the Active Differential has been uprated to reduce steering sensitivity at very high speeds.

Rear damper top mounts have been stiffened over and above the changes found on the XKR-S Coupe while the rear wheel steer effect has been optimised for agility. Spring rates front and rear have been increased by 28 percent while a bespoke Adaptive Damping programme for the XKR-S maximises body control, traction and grip.

Unsprung mass has been reduced by nearly five percent through the fitment of lightweight, forged alloy wheels, which also offer greater traction and grip levels thanks to wider rear tyres that were specifically developed for use on the XKR-S and serve to increase the size of the tyre contact patch. The Jaguar XKR-S convertible rides on Pirelli P-Zero tyres (255/35 ZR20 at the front and 295/30 ZR20 at the rear).

In order to allow the enthusiastic driver to enjoy the benefits of these changes, the Dynamic Stability Control system has undergone bespoke changes. In Trac DSC mode, specific traction, stability and Active Differential settings reduce intervention levels and enhance mid-corner adjustability, allowing the exhilarating handling to be safely exploited to the full.

The Jaguar High Performance Braking System fitted as standard is more than a match for the car's seductive performance. Huge brake discs - 380mm front and 376mm rear - in combination with aluminium calipers and pad area increases of 44 percent front and 31 percent rear in comparison to the XK provide confidence inspiring levels of power, stability and feel.

Interior
With the convertible hood stowed away, the interior of the XKR-S will be subject to as many envious glances as the exterior, with both highlighting the car's high performance intent.

Exclusive to the XKR-S models are carbon-leather trimmed versions of Jaguar's Performance seats which feature integrated head rests, racing harness cut-outs and increased side and squab support to hold driver and passenger securely during high speed cornering. The 16-way adjustable, heated seats feature highlights of carbon leather and contrast micropiping unique to the model.

Superb tactile interfaces are provided by the multifunction three-spoke leather-wrapped steering wheel and Jaguar-embossed bright stainless steel pedals. Other premium surfaces include soft-feel paint for the switches and a gloss black centre console. An exclusive dark aluminium finish is available as standard with an optional Piano Black finish also available.

Read More

Chevrolet Camaro 1LE, 2013

 

 

 

 

• Chevrolet Camaro 1LE, 2013

The road-racing-inspired Chevrolet Camaro 1LE performance package returns for 2013 with unique gearing, suspension tuning and tires that make the model capable of more than 1 g of lateral acceleration and a sub-three minute lap time at Virginia International Raceway's Grand Course. It is offered on Camaro SS coupes with manual transmissions.

The 1LE package is offered on 1SS and 2SS coupe models with an exclusive Tremec TR6060-MM6 six-speed manual transmission. Paired with a numerically higher 3.91 final-drive ratio, the close-ratio gearing of the transmission is tuned for road-racing performance. As with the ZL1, the 1LE transmission features a standard air-to-liquid cooling system for track use.

The Chevrolet Camaro 1LE also features exclusive, monotube rear dampers instead of the twin-tube dampers on SS models. The new hardware allowed engineers to tune the 1LE suspension to focus on optimal body-motion control while preserving much of the ride quality and wheel-motion control of the Camaro SS.

Other changes to optimize the 1LE for track-day use:

•     Larger, 27-mm solid front stabilizer bar, and 28-mm solid rear stabilizer bar for improved body control
•     Higher-capacity rear-axle half shafts to cope with increased levels of traction
•     Strut tower brace for improved steering feel and response
•     ZL1-based 20 x 10-inch front and 20 x 10-inch aluminum wheels
•     285/35ZR20 Goodyear Eagle Supercar G:2 tires front and rear (identical to the front tires for ZL1)
•     ZL1 wheel bearings, toe links and rear shock mounts for improved on-track performance
•     ZL1 high-capacity fuel pump and additional fuel pickups for improved fuel delivery during high-load cornering.

Visually, the 1LE package is distinguished by its matte black hood, front splitter and rear spoiler - as well as the 10-spoke ZL1-based wheels, which are finished in black. The functional front splitter and rear spoiler contribute to the car's on-track performance by helping to reduce aerodynamic lift at high speeds.

Inside, the Chevrolet Camaro 1LE package incorporates the ZL1's flat-bottom steering wheel, trimmed in sueded-microfiber and designed for easier heel-and-toe driving on the racetrack. The quick-acting, short-throw shifter from the ZL1 is also trimmed in sueded-microfiber.

In anticipation of consumers entering the 1LE in amateur-racing events, Chevrolet is pursuing SCCA approval of the 1LE package for Touring Class competition.

The first Chevrolet Camaro 1LE package was introduced in 1988, inspired by Camaro's involvement in Pro-Am road racing.

Read More

Chrysler 300C, 2012

 

 

 

 

 

 

•  Chrysler 300C, 2012

Though instantly recognisable as a motoring icon, the 2012 Chrysler 300C, which goes on sale in the UK on 14 June 2012, is new in every respect. Better built, safer, even more lavishly equipped and more efficient than its predecessor, the new Chrysler 300C retains a unique position in the executive sector. By offering the type of engineering, design, materials and driving dynamics that European buyers expect, combined with American style, personality and value for money, the 2012 Chrysler 300C will appeal to head and heart.

Unlike many rivals which offer a baffling array of engine sizes and trim levels, the new Chrysler 300C, which will become available here in two versions, promises the perfect power output for the car, with two well-judged specifications. The new 3.0-litre V6 turbo diesel benefits from Fiat Group Automobiles' ground-breaking MultiJet 2 technology to provide a class-leading compromise between effortless power and fuel-saving efficiency.

Whether in Limited or Executive guise, the Chrysler 300C is a very well equipped car. Much of the technology that rivals sell as premium priced optional extras feature as standard equipment on the Limited model. Rain Brake Support which helps keep the brake pads dry for better stopping power in poor conditions is unique to this class of car. Ventilated front seats and heated rears, the Uconnect infotainment system with Bluetooth, dual-zone climate control, an 8.4-inch touch screen display, mirrors that darken automatically to limit headlight glare, cruise control, and 18-inch wheels are all standard on the Limited model.

The Executive version has a Blind Spot Monitoring (BSM) system, radar Adaptive Cruise Control (ACC) and a two-panel panoramic sunroof as well as the forward collision monitoring system and 20-inch alloy wheels.

Perhaps the biggest change over its predecessor is the quality of the new Chrysler 300C. By honing every step of the design, engineering and production processes of its new executive model, the American firm has taken a giant step forward in both perceived and actual quality.

The interior has high grade materials throughout, from the redesigned Nappa leather seats to real wood panels on the dashboard. The body is made from a variety of new materials including advanced high resistance and ultra-strong steel. The improved rigidity combined with all-new suspension means the rear-wheel drive Chrysler 300C doesn't just handle better than ever, it's also quieter and more refined too.

The more rigid construction also combines with a suite of nearly 70 electronic safety aids that ensure the Chrysler 300C offers top-class safety in a supremely stylish package.

QUALITY: AMBITIOUS TARGETS MET
The new Chrysler 300C has been designed to take on the best cars in the executive sector in terms of quality. Not only is it crammed with standard equipment, some of it a first for this class of car, it is also superbly built.

Even before build began, the American firm studied rival models covering a spectrum of performance attributes including quality, craftsmanship and refinement. The challenge was then to construct a car that matched or exceeded these levels. To help reach such ambitious targets, the 300C was one of the first Fiat-Chrysler Group vehicles to be examined during the digital design process by a special internal team for 'perceived quality' from the point of view of the most demanding customers.

Build
Perceived quality is the impression given to someone when they look at and touch things. Whether they're sitting in a seat, grasping a steering wheel or simply looking at the fascia, the shape of objects, the materials they're made from and the tactile sensations help people form an opinion of what they see.

In order that the view of the Chrysler 300C would be of a high quality executive car, this internal team worked in close contact with the designers and engineers to improve everything from the assembly and finishes to the quality of the surfaces and materials.

Advanced high-strength steel delivers world-class structural stiffness which leads to exceptional interior quietness, confident handling and outstanding safety performance. Sound suppression inside is further improved thanks to two composite underbody panels that provide more than 2.4 metres of acoustic insulation, a windscreen and front side windows specially designed for their exceptional acoustic performance, triple seals around the doors and special wheel well liners. A laser-braised roof panel and rail sections that deliver a clean, uninterrupted and aerodynamic unibody give further noise reduction.

To ensure this design is implemented in the best possible way, the factory where the 300C is built in Brampton, Toronto, Canada embraces the Fiat Group's World Class Manufacturing philosophy which has rigorous standards for all plant processes from safety and environment to maintenance, logistics and quality. The goal is to improve production performance and quality continuously with built-in flexibility while gradually eliminating waste.

The Interior
The Chrysler 300C's cabin has been designed to exude luxury. Instrument and door panels are clad with soft-touch materials chosen to meet Chrysler's strict quality goals. For example, the steering wheel is finished in highly polished walnut and hand-stitched leather. But the stitches have been strategically placed so the driver's hands come into contact only with smooth surfaces.

The instrument panel is treated with the cast skin technique which appears similar to leather, while the seats are covered in Nappa leather. Real wood inserts on the instrument panel, doors, centre console and steering wheel surround further heighten the upscale appearance. The dashboard is finished with discreet chrome touches to emphasise the Chrysler 300C's high quality nature.

All-new seats have been designed to guarantee best-in-class comfort. These feature serpentine spring suspension as their foundation. A stiffer foam material is used in the side upholstery for improved lateral support while less dense foam is used in the lower part of the seats and in the backrest to increase comfort during long journeys. The front seats have four-way lumbar adjustment to suit individual tastes.

To improve rear seat comfort, the front seat backrests have a sculpted shape for about 20cm more knee room. To ensure more foot room, the seat guides are located at the edges of the base.

The interior has a pleasing ambiance thanks to muted Sapphire Blue LEDs. In front of the driver there's a new instrument cluster with two large faces. Features are accented with raised Sapphire Blue tick marks and chromed rings complete the contemporary and premium feel.

The driver also has the all-new Electronic Vehicle Information Centre (EVIC). Again in Sapphire Blue, this has been designed to be easy to read and logically displayed to keep the driver as informed as possible.

As with all roomy and refined interiors, the secret of the 300C's success is having plenty of storage. So that the central armrest is suitable for all shapes and sizes of driver, it slides lengthwise. Beneath it is a sliding tray and a compartment that contains the power connectors for USB devices.

All doors feature oversize pockets with bottle supports and there's a flocked rubber storage compartment with lighting ahead of the gear lever. The roomy glove compartment is split with a shelf and features a centrally mounted light for more uniform light distribution. The two front cup holders, cooled and heated as standard, come with LED lighting that intuitively glows blue when they're chilled, red when hot. They also feature locking rings so they can take bottles of various sizes. As an example of the trouble Chrysler has taken to get the detail of the Chrysler 300C exactly right, the roller closing that covers the front cupholders wasn't just optimised for style and functionality. It was also designed to make a high quality sound when opened and closed.

EQUIPMENT: LUXURY AS STANDARD
As befits a range-topping model, the Chrysler 300C is lavishly equipped, whether in Limited or even more luxuriously appointed Executive trim. And unlike the majority of its rivals the equipment comes as standard.

Everything possible has been done to make the Chrysler 300C an effortless travelling companion. Keyless Enter 'n Go employs electronic sensors to detect the key fob's presence. The car unlocks automatically and the engine starts by pushing a button without needing to insert a key.

The steering column, which adjusts forwards and backwards as well as up and down, has a memory function to allow more than one driver to get comfortable quickly. The pedals too can be adjusted for maximum comfort.

The automatic headlights 'know' when it's getting dark and turn themselves on without any driver intervention. They also feature Adaptive Forward Lighting (AFL) which adjusts the headlight beam up to 15 degrees to the left or right depending on which direction the front wheels are pointing.

To comply with current legislation, Daytime Running Lights (DRL) are standard, using efficient LEDs front and rear and High Intensity Discharge (HID) headlights provide lighting that's three times brighter than regular units. The headlights also employ the SmartBeam system that adapts them to the light in the surrounding environment, ensuring the 300C driver benefits from the maximum light possible without blinding oncoming traffic.

When it rains the automatic windscreen wipers detect drops on the windscreen and start working without the driver telling them to. And the Automatic Temperature Control system measures the humidity inside the vehicle and automatically demists the screen without any driver intervention.

The driver's side door mirror darkens automatically to reduce any dazzling created by the headlights of vehicles behind, as does the internal mirror. Both side mirrors lower themselves when reverse gear is engaged to give the driver better visibility of the ground, kerbs or other obstacles.

The full length dual pane panoramic sun roof, standard on the Executive, has an auto reverse function that can prevent the roof closing if it senses any obstruction. There's an automatic sun blind in the rear window that reduces heat inside the passenger compartment and increases privacy. This automatically lowers in reverse for maximum rear visibility.

Presuming that there are certain areas of the car that executive car buyers would prefer not to touch, the traditional fuel cap is a thing of the past on the Chrysler 300C. Instead the fuel flap opens at the push of a button. A fuel filler pipe opens when the pump nozzle is inserted and closes automatically when refuelling has been completed, helping to protect against theft and vandalism as well as fuel spills and incorrect fuelling.

To avert any danger of breakdown, an Intelligent Battery Sensor continuously measures the flow of current going to and from the battery. If it detects that the battery is running down it disables the less critical electric systems and warns the driver.

Uconnect
The Chrysler 300C features the company's advanced Uconnect infotainment system of on-board technologies that ensures driver and passengers remain connected, safe and comfortable.

This system displays all the information the driver or passenger requests on an 8.4-inch touch screen, the largest in this car's class. With its multimedia and portable mobile device connectivity, it is specifically designed to enrich the experience of driving and travelling in the Chrysler 300C.

For maximum safety and ease of use, audio and connectivity controls are located on the spokes of the steering wheel and can be activated hands-free by voice alone. Uconnect Voice Command with Bluetooth lets the driver manage a Bluetooth compatible phone while keeping both hands on the steering wheel. The first time the phone is synchronised, the phonebook is downloaded on to the car's hard drive and numbers can be selected simply by saying the corresponding name.

Voice commands can also be used to select the available radio modes. In the arm rest there's a USB port with iPod control. This lets the driver run an iPod or similar mobile device either through the steering wheel controls or using the touch screen. The USB port allows any USB supplied device to be recharged and will play audio files stored in MP3 and WMA format on a USB drive.

The touch screen controls the single DVD player, an SD card reader, the automatic dual-zone climate control, the radio and the Garmin navigation system. This has clear maps and optional voice instruction along with suggested points of interest, making it easy to find restaurants, shops and hospitals in the area.

There are three levels of audio system. The Limited version's standard sound system has six speakers with a 276 Watt six-channel amplifier. Two 3.5-inch speakers are in the instrument panel, two 6 x 9-inch speakers are set in the front doors and two are in the rear parcel shelf. A nine-speaker Alpine system is optional. This has an 11 channel amplifier with 506 Watts of power plus digital signal processing with 7.1 surround sound. It features three 3.5-inch speakers in the instrument panel, two 6 x 9-inch speakers in the front doors, two 3.5-inch speakers in the rear doors, two 6 x 9-inch speakers in the rear parcel shelf, plus an 8-inch subwoofer in the rear parcel shelf.

This system is standard on the Executive model, while a 19-speaker Harman Kardon sound system is optional. This sophisticated 900 Watt device has a 12-channel Harman Kardon amplifier. There are six 3.5-inch speakers in the instrument panel, two 6 x 9-inch speakers in the front doors, four 3.5-inch speakers in the rear doors, two 6 x 9-inch speakers, four 3.5-inch speakers and a 10-inch sub woofer in the rear parcel shelf.

Read More